This steel pipe bundling and strapping machine is fork type bundling and full auto strapping. The flying saw, bundling section, strapping section connect with each other and sending signal to corperate the movement.
Ⅰ、Steel pipe information：the objective of packing
Pipe size：Max Φ165mm for round pipe, max 150*150mm for square pipe
Pipe length：L=6 to 12 meters
Ⅱ、Brief description of machine
1. Roll conveyor. The pipes are cut off by flying saw, the flying saw detect the unqualified part of pipe and cut off the part, at the same time send signal to turning over device on roller conveyer, the device receiving the signal and turn the unqualified pipe into unqualified pipe basket. Qualified pipes are turn to another side under bundling.
2. Counting device: The pipes are counted and recorded when they are sent by roll table waiting for next step.
3. Bundling section: The number of pipes reach to a layer’s pipe number, this layer of pipes will be pushed neatly and the fork mechanism will lift the whole layer into the bundle basket. Retangular pipe turning device is not included here.
4. Bundle basket with moving car: This device receive the pipe layers sent by fork mechanism, and when the bundle is ready( reach to setting number and shape), the carrige under the basket will move the bundle vertically and horizontally to the strapping position.
5. Bundles transfering: This part is as follow photo, this place allow four or five bundles for temporary storage waiting for crane to take them to warehouse.
6. Hydraulic and electrical control: Hydraulic system and electricity offer the power of the machines and controled by PLC touch screen.
The following photo is the sample of touch screen. Seller can make it more suitable with buyer’s habit such as choose bundle shape for programm; input pipe diameter to run the program.
7．Full-auto strapping machine
This machine is installed on the bundles conveyer route. When the bundles are sent to strapping position, the strapper receives the signal from bundling section and do the strapping work, cut the strap and sending the strapp complete signal. The the strapping head preparing the steel strip waiting next strapping.
Electric motor and peumatic driving
Strapping head Lifting distance
Steel belt material
It is used for strapping, galvanized steel strip
Steel belt size
Width: 31.75±0.127mm，Thickness 0.8mm
Notched closure joint
Time of joining
Weight of strapping head
380V Three phase 50Hz
8. Temporary storage： After bundling and strapping, the pipe pakage will be sent to a temporary storage roll bed, waiting for the crane taking it to warehouse.
If you are interested in our machine, please contact us, firstname.lastname@example.org