Product Details
Product Name: Radial Drilling Machine RT40/50/60
Performance: · Frequency Conversion Radial Drilling Machine;
· Germany original "Lenze" transducer spindle speed stepless, digital readout ofr the display of speed;
· Strength spindle, with limiting protection for limiting position;
· Electrical box and coolant button is on the right of spindle box;
· Hydraulic pressure clamp;
· Interlock of rocker arm clamping and up down movement;
· Clamping of spindle and spindle box could be simultaneous or separated;
· Trochoid thin oil lubrication;
· With safety protection device that import from UK;
· Importable electrical components with CE, CSA, UL standard;
· Length worktable, supply inclined worktable and quick change collet as optional accessories.
· Hydraulic clamping of electromagnetic value (For RT60 and RT50)
· Clamping controlled by motor (Only for RT40)
Standard Accessories:
· Keyless drill chuck
· Connecting bar for drill chuck
· Shaft sleeve for taper shank tool
· Wedge for taper shank tool
Optional Accessories:
· Rotation worktable
· Quick change collet
Main Technical Data of The Radial Drilling Machine:
Name of the technical data |
RT40×13 |
RT50×14 |
RT60×16 |
Max. drilling diameter (No.45 steel) |
40 |
50 |
62 |
Max. drilling diameter (HT200 cast iron)(mm)
|
52 |
60 |
72 |
Max tapping diameter(No.45 steel)(mm)
|
M32 |
M40 |
M46 |
Max tapping diameter(HT200 cast iron)(mm)
|
M40 |
M46 |
M52 |
Distance between column center line to the spindle center line(mm)
|
300~1300 |
350~1400 |
350~1600
|
Travel distance of the spindle box in horizontal (by manual) (mm)
|
1000 |
1050 |
1250 |
Distance between spindle end face to the machine bottom table (mm)
|
300~1200 |
350~1200 |
350~1250
|
Max. spindle travel(mm)
|
260 |
280 |
315 |
Dimension of column(mm)
|
280 |
320 |
350 |
Spindle taper |
MT.4 |
MT.5 |
MT.5 |
Steps of spindle speed |
step-less |
step-less |
step-less |
Spindle speed range (r/min) |
54 ~ 340~2150 |
38 ~ 275;275~2000 |
38 ~ 275;275~2000 |
Steps of spindle feed |
4 |
6 |
8 |
Range of the spindle feed rate (mm/r) |
0.10~0.63 |
0.06~0.85 |
0.06~1.00
|
Speed of the arm up and down (m/min) |
1.2 |
1.2 |
1.2 |
Arm moving angle (degree) |
±180 |
±180 |
±180 |
Spindle moving distance of each dial revolution (mm) |
122 |
122 |
122 |
Main motor power (Frequency converson motor) (kW) |
2.2 |
3.0 |
4.0 |
Power for the arm up and down motor (kW) |
1.1 |
1.1 |
1.5 |
Power of clamping oil pump for spindle box, column and arm (kW) |
2-0.37 |
0.75 |
0.75 |
Machine weight (without table) (Kg) |
2300 |
3200 |
3800 |
Machine dimension (L x W x H) (mm) |
2070×850×2430 |
2195×970×2480 |
2490×1050×2600 |