Three ribs steel bar making machineIntroductionCold rolling mill have two types,including two ribs cold rolling mill and three ribs cold rolling mill. It can reduce costs and save about 40% steel.Tensile strength and yield strength of steel bar is reinforced.Through solid midfrequency heating, tensile strength of rebar can reach standard 400Mpa,500Mpa and 600Mpa.The raw material could be Q215,Q235,low carbon and middle carbon steel,etc.
Flow chart is:Wire rod → Materials shaft → Scaling and strength relieving machine → Rolling mill → Straighten machine → Fly shear → Rebar → Materials shaft → Final package
Name |
Unit |
Power |
Weight |
Feeding Materials shaft |
1 |
/ |
200kg |
Scaling and strength relieving machine |
1 |
2.2kw |
1300kg |
Rolling mill |
1 |
160kw |
9500kg |
Straighten machine |
1 |
15kw |
1800kg |
Fly shear |
1 |
15kw |
1500kg |
Automatic materials shaft |
1 |
2.2kw |
300kg |
Jointing machine and electric control box |
1 |
3kw |
210kg |
Feeding materials shaft
Funcition:ready for raw material
Scaling and strength relieving machine
Function: the two machine is for reducing the rust on the wire rod, make wire rod more smoothly, the relieving machine will let wire rod more strength, anti-pulling.
Rolling mill
Function: make two ribbed bar from wire rod.
Straighten machine
Function: After rolling, the rebar will go through the straighten machine,Make the wire rod into rebar It is consisted some wheels inside
Fly shear
Fuction: it is for cutting rebar after making rebar
Automatic materials shaft
Function: it is mainly for collecting rebar.
Jointing machine and electric control box
Jointing machine is mainly for joining the two wire rod end together
Electric box for controlling whole system
Operating rules and maintain 1. Before operating the machine, we should check the electric equipments, three phase electricity is ok, the machine bottom and so on
2. Check the lubrication whether is enough, the lubrication for the bearing
3. The raw materials distance should be at least 6-10mm from the derusting machine.
4.We should let the stress is suitable for the stress-relieving machine, If the stress is too big, the steel is easy to break
5. We should adjust the screw for strand line of wire diameter
6. When stop the machine, we need to stop the wire drawing machine firstly, then stop the steel plate machine
From material to final productsMain spare partsOur clients and delivery